T-Rex Replica, T-Rex Fuel Tank, T-Rex Room-mate reverb pedal
Analog Man has the T-Rex Replica, Fuel tank, and Room-mate pedals in stock!
Also see buyanalogman.com for online ordering of these pedals with more ordering options.
Just
leave it on! - most players say
It is hard to believe,
that this delay pedal is digital. It gives the warmth of
all-tube echo and also cool digital delay in studio
quality. All with the convenience of one pedal.
TIME, REPEAT, MIX and LEVEL knobs allow for quick,
precise control. A Hi-cut button cuts high frequencies on
repeats - perfectly simulating the tone of a 60s era tape
echo.
With a simple flick of a switch you can alter the delay’s
subdivision parameter from 1/4 to 1/8 triplets, and to
make the delay fit your purpose we even added a Tap-Tempo
switch to get you right in time with your tune.
For example, for most Pink Floyd and U2, use triplets and
tap in the song tempo for the perfect setting.
Play it and youll buy it!
Soundfiles
All soundfiles were
recorded in Sun Studio (Copenhagen) by Mika Vandborg,
solo artist and guitarplayer in "Gnags" and
"Dicte".
Mika plays a Fender Stratocaster 1964 and a T-Rex T25
BigTone Combo.
>> Click
this link to see more of Mika Vandborg
Lead.
Delay 2 o´clock, repeats 9 o´clock, tempo 9 o´clock.
>> Replica
off
>> Replica
on
Slap back delay.
Delay 11 o´clock, repeats 10 o´clock, tempo 1 o´clock.
>> Replica
off
>> Replica
on
Long delay accords.
Delay 12 o´clock, repeats 10 o´clock, tempo 3 o´clock.
>> Replica
off
>> Replica
on
Features
The DIRECT plug on the
top is an output plug. The "dry" signal is sent
directly through the pedal to the DIRECT plug without
disturbance. You can use this plug to:
- send the signal to a tuner
- send the signal to an extra amplifier and get a stereo
like sound, when playing two amplifiers
- make a retro sound. You send the delayed signal using
the OUTPUT plug to a stereo simulator, that sends the
stereo signal to two amplifiers. You connect a third
amplifier using the DIRECT plug. Retro sound!
The ECHO –knob determines the amount of processed
signal in the signal mix.
- In minimum position only the direct signal is heard
- In maximum position only the delay (processed signal)
is heard
The LEVEL –knob sets the overall volume.
At maximum level, the signal is boosted approx. 3dB.
The REPEAT –knob controls the number of repetitions
of the delay signal.
- In minimum position the delay signal is only repeated
once
- In maximum position the delay signal is repeated to
almost infinity
The TEMPO –knob sets the delay time.
- Minimum delay time is approx. 12 milliseconds
- Maximum delay time is approx. 1500 milliseconds (1.5
seconds)
The LED indicator below the TEMPO inscription indicates
the delay time.
When the TEMPO –knob is turned while playing, the
delay signal is muted. You still hear the normal sounds,
but you will not be able to make crazy sounds by moving the
tempo knob while playing.
The TAP TEMPO -footswitch enables you to tap the delay
time while playing.
The SUBDIVISION –button generates quarternote
triplets of the tapped tempo. First you hit the button,
then you tap the tempo using the TAP/TEMPO footswitch.
Instead of coming on the beat, the echo now comes between
the beats like 1-echo-2-echo-3-echo-4 etc.
To really hear the difference, it is recommended to use a
drum machine or similar to hold the beat while using the
SUBDIVISION function.
The BROWN –button is a High-Cut filter that alters
the tone of the repeats. The result is a warmer, smoother
delay sound reminiscent of the tone of a 60´s era tape
echo. It really gets quite dark, the normal setting is
best for most people.
The MIDI –socket allows you to control the tempo
externally. (CTL. No. 20)
Controls:
ECHO, LEVEL, REPEAT and TEMPO.
Modes:
SUBDIVISION and BROWN
External control:
MIDI IN (CTL. No. 20)
Connections:
INPUT-Jack 6,3 mm.
OUTPUT-Jack 6,3 mm.
DIRECT OUTPUT-Jack 6,3 mm.
Power supply (comes with the pedal):
This is the coolest
feature, the power supply will work anywhere in the world.
It comes with plug adaptors to fit most power sockets in
the world.
100, 115 or 230V AC/50-60Hz, depending on your country
standard. It provides 12 volt DC and 300 mA.
The pedal works with a 12 volt DC power
supply, but it consumes up to 300 mA. Some DC power
supplies can't deliver sufficient power - at peaks. So
you should go higher, to probably 500 mA.
Usually you can hear if the power is not sufficient,
it will have some distortion.
The new voodoo lab PP2+ will work ok
if you use the LINE6 outputs, with the DIP switch ON
for higher voltage and higher current. It will actually
put out about 14V that way, which works with the replica
but some people think it does not sound as good with the
voodoo labs power supply. So use the included power supply
if possible which is well regulated to 12Vdc and has plenty
of available power.
Effect usage:
5 watts
For easy ordering, check out our new website buyanalogman.com . The new website uses a shopping cart for everything so it's very easy to buy multiple items or add in options. It allows using paypal in addition to several other payment methods including credit cards. It also keeps track of status, tracking numbers, etc and allow editing orders after they are placed so it's best to use our new website.
FuelTank is the power supply for effect users. It gives 1000mA through 10 standard plugs, of which 2 are isolated 12-volt.
Features: Mains Input Power plug, 3-pin standard plug, same input plug as a computer
Voltage Selector, 115/230 volts, works overseas!!! Supply your own computer-style plug-in power cable for your country, or use the US style cable supplied.
8 DC output plugs 9-volt, all connected to the same ground. 500mA total.
12-volt DC output, isolated ground, works great for our Chorus pedals or Tube Screamers etc for more clarity and headroom. 500mA Total.
12-volt AC ouput, with a 2.5mm jack. Has isolated ground, for the T-Rex Replica and other AC pedals like some E-H tube pedals, Black Cat ring mod or Vibe, etc. 500mA Total.
Blue LED is activated when unit is powered up.
The FuelTank gives a total of 1000mA.
This is small and will fit under the PedalTrains, even the pedaltrain Junior if you use the angled ends on the power supply.
Comes with the following cables:
For easy ordering, check out our new website buyanalogman.com . The new website uses a shopping cart for everything so it's very easy to buy multiple items or add in options. It allows using paypal in addition to several other payment methods including credit cards. It also keeps track of status, tracking numbers, etc and allow editing orders after they are placed so it's best to use our new website.
We have the RoomMate Tube Reverb in stock for $369.
Room-Mate from T-Rex Engineering is the sweetest-sounding reverb pedal you’ve ever heard. That’s because the four guitar reverb presets are only the start of the rich, warm sound that this box delivers. A built-in 300 volt power supply takes the whole effect to the next level – powering a T-Rex tube that adds a voluminous, earthy warmth to incredible detail and spacious true stereo. But don’t take our word for it – plug your guitar into Room-Mate just once – and you’ll never want to use another reverb again.
Four signature sounds
Room-Mate’s mode knob gives you a choice of four signature presets. Classic Plate is everything you want in a vintage medium plate reverb, while Warm Hall gives you a bigger sound with a natural warmth. With superb high-end resolution, Bright Hall gives you amazing detail, while Chorus with Warm Reverb is sweet-sounding effect for bringing your acoustic guitar to life on stage.
Mix, high cut, stereo out
To shape your sound further, Room-Mate features a mix control and a high cut knob for increasing definition or backing off on the highs vintage-style. And there’s naturally a stereo out for the studio or stereo live situations.
Features
4 modes, T-Rex tube, MODE, MIX, LEVEL and HIGH CUT knobs
ON/OFF switch,
True bypass switching
3 jacks (in/stereo out),
Includes universal 100-240 volt wall wart, 12V DC output,
uses 300mA of power to run the tube so it will not work with
most power supplies.
lilac color.
For easy ordering, check out our new website buyanalogman.com . The new website uses a shopping cart for everything so it's very easy to buy multiple items or add in options. It allows using paypal in addition to several other payment methods including credit cards. It also keeps track of status, tracking numbers, etc and allow editing orders after they are placed so it's best to use our new website.
We also have the TREMSTER tremolo in stock for $199. EMail for ordering info.
return to Analog Man